DIY Camera Stabilizer - Start Your Build Project Right






Building your own camera stabilizer can be a fun and rewarding project.  If you're up for the challenge the process will teach you the fundamentals of dynamic balance, weight distribution, design, and the precision involved to make it all happen.  This is the start of our multi part series covering as many of the build steps we can.   We've spent years perfecting our stabilizers and now want to share with you some of the knowledge we've gained along the way.






DIY Camera Stabilizer Anatomy




The anatomy of a floating camera stabilizer is fairly standard. How you implement it, however, is up to you. The example shown is broken down to its base components, some of which are simple to build, while others require precision machining.  The good news is you don't have to let equipment limitations stop your DIY project, because we have many of the parts available in our DIY-Garage.




Comments

Post a Comment

Popular posts from this blog

3-Axis Camera Stabilizer Gimbal

Image
Over the course of several hours thirty four different parts come together to produce just one of the high precision 3-axis camera stabilizer gimbals found in our Specter Stabilizer .   For precise alignment of the mounting holes, the middle layer of the gimbal starts out as a square .   Once the holes are drilled and threaded the corners are cut off prior to final rounding( Shown on right) . Designed with three layers that are machined together for a perfect fit, lighter weight, and calibration adjustment for perfect balance. .  It takes over seventy different parts to assemble just one of our Specter Stabilizers , seventeen of which are custom machined with tolerances of just a few thousandth of an inch. Here’s a close up look at just two of those custom parts found in the 3-axis gimbal. With high precision ultra low friction surfaces, the new fully ceramic main bearing will give you the super smooth footage you need.  With a bearing that retails
Read more

Nifty Fifty Battle - Canon EF 50mm F/1.8 II vs Canon EF 50mm F/1.8 STM Lenses

Image
  Canon lovers have long enjoyed the 50mm lens, so much so that they nicknamed it the Nifty Fifty. Over the years Canon has come out with a few variations of it.  We're going to compare two of those, the Canon EF 50mm F/1.8 II , and the Canon EF 50mm F/1.8 STM . Both lenses are of course 50mm, have an aperture of 1:1.8, and lack image stabilization, so we're going to focus more on the differences between the two in this blog post. Lens mount - [Winner] Canon EF 50mm F/1.8 STM Canon EF 50mm F/1.8 STM: Metal Canon EF 50mm F/1.8 II: Plastic Starting with the painfully obvious difference between the two, the Canon EF 50mm F/1.8 STM features a metal lens mount, which means it'll hold up a lot longer when it comes to users that switch lenses on a regular basis.  If you're the type that sticks with just one lens, I wouldn't consider this a deal breaker. Aperture blades - [Winner] Canon EF 50mm F/1.8 STM Canon EF 50mm F/1.8 STM: 7 blades Canon EF 50mm F/1.8 II: 5 blades
Read more